PRJ to STL Converter
FileFlip converts PRJ to STL entirely inside your browser, using Assimp compiled to WebAssembly. The file is never uploaded to a server: it is read off your disk, converted on your own machine, and saved back by the browser. That means no file-size limit, no queue and no account.
How do I convert a PRJ file to STL?#
- Drop your PRJ file onto the converter at the top of this page, or click it to pick one from your computer. You can add as many as you like.
- Leave the target set to STL and the conversion starts on its own. FileFlip downloads 11.2 MB of WebAssembly the first time and nothing after that, then runs Assimp on your own machine.
- Save the STL file. Your browser writes it straight to your downloads folder, because there was never a server holding it.
Does converting PRJ to STL lose quality?#
Not in the sense of pixels or samples. Converting PRJ to STL rebuilds the file in STL's own model rather than re-encoding it, so everything STL can represent comes through exactly and anything it cannot has to be dropped. Expect the geometry to be exact, and anything the target has no place for, such as a rig, to be left behind.
Is it safe to convert PRJ files online?#
Yes, because nothing is uploaded. FileFlip converts PRJ files inside the browser tab you already have open, using WebAssembly builds of the same engines a desktop converter would install. Your file is read from your own disk into the page's memory, and no request carrying it is ever made.
You do not have to take that on trust. Open your browser's network panel, run a conversion, and you will see the engine come down and your file go nowhere. There is no upload, no server-side copy, no retention window, and no account tied to what you converted.
How FileFlip works lists every engine, its version and its download size, and shows how to check for yourself that nothing leaves your machine.
What PRJ to STL actually does to the file#
Converting PRJ to STL runs on Assimp, downloads 11.2 MB of WebAssembly the first time and nothing after that, rebuilds the file in the target's own model, and drops materials, textures and skeleton and animation.
| Engine | Assimp |
|---|---|
| Conversion path | One step: PRJ → STL |
| Downloaded to your browser | 11.2 MB, once, then cached by your browser |
| Quality | Rebuilt in the target's model |
| You get back | One file |
| Where it runs | In a background worker, so the page stays responsive |
What survives the conversion
| What is in the file | This conversion | Why |
|---|---|---|
| Materials | Dropped | The target format has nowhere to put it. |
| Textures | Dropped | The target format has nowhere to put it. |
| Skeleton and animation | Dropped | The target format has nowhere to put it. |
Worth knowing before you start:
- the target stores triangles and nothing else, so materials, colours, and texture coordinates have nowhere to go
- if the source carries a skeleton or animation, this target has no place to store it
What is a PRJ file?#
A PRJ file from 3D Studio is a project variant of Autodesk's chunk-based 3DS format, the same binary structure with a different top-level chunk marking it as a working project rather than an exported mesh.
Use PRJ only when working directly in original 3D Studio DOS project files rather than their exported meshes.
Convert PRJ to OBJ or glTF to get the mesh into anything modern, since current tools target 3DS or newer formats rather than the old project files.
What is an STL file?#
An STL file is a triangle mesh created by 3D Systems in 1987 for its stereolithography 3D printers, storing nothing but a flat list of triangle facets and their normals, with no colour, material or unit of measurement attached.
Use STL when the only destination is a 3D printer's slicer, which is all the format was designed to feed.
Convert STL to 3MF when colour, material or unit information needs to travel with the geometry, since STL has nowhere to put any of it.
PRJ to STL questions people ask#
What is a PRJ file from 3D Studio?
A PRJ file is a 3D Studio DOS project, using the same chunk-based structure as a 3DS file but marked as the working project a 3DS mesh gets exported from, rather than the exported mesh itself.
Is a 3D Studio PRJ file the same as an ArcGIS PRJ file?
No, they're unrelated despite sharing an extension. A 3D Studio PRJ file is binary 3D scene data, while GIS software like ArcGIS uses .prj for a plain-text coordinate-system definition. The two need to be told apart by their source, not their extension.
What's the difference between a PRJ and a 3DS file?
Both use 3D Studio's chunk-based format, but a 3DS file is the exported mesh while a PRJ file is the working project, which can carry additional light and camera chunks that a plain 3DS export doesn't.
What is an STL file used for?
An STL file is the standard input for 3D printer slicing software, storing a model's surface as a list of triangles with nothing else attached. Slicers use it to work out where to lay down material layer by layer.