SR2 to TIFF Converter
FileFlip converts SR2 to TIFF entirely inside your browser, using ImageMagick compiled to WebAssembly. The file is never uploaded to a server: it is read off your disk, converted on your own machine, and saved back by the browser. That means no file-size limit, no queue and no account.
How do I convert an SR2 file to TIFF?#
- Drop your SR2 file onto the converter at the top of this page, or click it to pick one from your computer. You can add as many as you like.
- Leave the target set to TIFF and the conversion starts on its own. FileFlip downloads 14.1 MB of WebAssembly the first time and nothing after that, then runs ImageMagick on your own machine.
- Save the TIFF file. Your browser writes it straight to your downloads folder, because there was never a server holding it.
Does converting SR2 to TIFF lose quality?#
No. Converting SR2 to TIFF writes the data out again without discarding any of it, so nothing that was in the SR2 file is lost on the way. What changes is the size of the file, not what is inside it.
Is it safe to convert SR2 files online?#
Yes, because nothing is uploaded. FileFlip converts SR2 files inside the browser tab you already have open, using WebAssembly builds of the same engines a desktop converter would install. Your file is read from your own disk into the page's memory, and no request carrying it is ever made.
You do not have to take that on trust. Open your browser's network panel, run a conversion, and you will see the engine come down and your file go nowhere. There is no upload, no server-side copy, no retention window, and no account tied to what you converted.
How FileFlip works lists every engine, its version and its download size, and shows how to check for yourself that nothing leaves your machine.
What SR2 to TIFF actually does to the file#
Converting SR2 to TIFF runs on ImageMagick, downloads 14.1 MB of WebAssembly the first time and nothing after that, writes the data out again without discarding any of it.
| Engine | ImageMagick |
|---|---|
| Conversion path | One step: SR2 → TIFF |
| Downloaded to your browser | 14.1 MB, once, then cached by your browser |
| Quality | Lossless |
| You get back | One file |
| Where it runs | In a background worker, so the page stays responsive |
Worth knowing before you start:
- camera raw is demosaiced with ImageMagick's defaults, which will not match the camera's own rendering
- some cameras write lossily compressed raw, so the source is not always a complete sensor record
What is an SR2 file?#
An SR2 file holds raw sensor data from Sony's 2005 Cyber-shot DSC-R1, using less encryption than Sony had applied to its earlier SRF format, before Sony replaced it with ARW the following year.
SR2 only turns up from a small set of Sony cameras from 2005, most notably the Cyber-shot DSC-R1; there's no active reason to choose it.
Convert SR2 files to DNG or JPEG, since current raw processors and Sony's own software support ARW and DNG far better than this short-lived intermediate format.
What is a TIFF file?#
A TIFF file stores one or more raster images, usually uncompressed or losslessly compressed, inside a tagged container that scanners, printers, and publishing software rely on to keep exact pixel data intact through repeated edits.
Use TIFF for scanned documents, print production, and archival photography, where preserving every pixel losslessly matters more than file size.
Convert TIFF to JPEG or PNG when the image needs to go on the web or be shared casually, since browsers cannot display TIFF and the files are far bigger than screen viewing requires.
SR2 to TIFF questions people ask#
What's the difference between SR2 and SRF?
SR2 is the raw format Sony introduced after SRF, on cameras like the Cyber-shot DSC-R1, and it carries far less of the file-level encryption that made SRF hard for third-party software to decode correctly.
What's the difference between SR2 and ARW?
SR2 was the raw format Sony used briefly around 2005, on cameras like the Cyber-shot DSC-R1, before replacing it with ARW starting with the Alpha DSLR-A100 in 2006. Every Alpha DSLR, SLT and mirrorless camera Sony has released since has written ARW instead.
What Sony cameras produced SR2 files?
SR2 appeared on the Sony Cyber-shot DSC-R1, a bridge camera released in 2005. Sony replaced it with ARW the following year when it launched the Alpha DSLR-A100, its first Alpha-branded DSLR, and every Sony camera since has written ARW instead.
What is a TIFF file used for?
TIFF files are used for scanned documents, professional photography, and print production, because the format can store an image with no compression loss at all. Publishing software, print shops, and archives favor it precisely because a TIFF looks identical no matter how many times it is opened and resaved.