STL to OBJ Converter
FileFlip converts STL to OBJ entirely inside your browser, using Assimp compiled to WebAssembly. The file is never uploaded to a server: it is read off your disk, converted on your own machine, and saved back by the browser. That means no file-size limit, no queue and no account.
How do I convert an STL file to OBJ?#
- Drop your STL file onto the converter at the top of this page, or click it to pick one from your computer. You can add as many as you like.
- Leave the target set to OBJ and the conversion starts on its own. FileFlip downloads 11.2 MB of WebAssembly the first time and nothing after that, then runs Assimp on your own machine.
- Save the OBJ file. Your browser writes it straight to your downloads folder, because there was never a server holding it.
Does converting STL to OBJ lose quality?#
Not in the sense of pixels or samples. Converting STL to OBJ rebuilds the file in OBJ's own model rather than re-encoding it, so everything OBJ can represent comes through exactly and anything it cannot has to be dropped. Expect the geometry to be exact, and anything the target has no place for, such as a rig, to be left behind.
Is it safe to convert STL files online?#
Yes, because nothing is uploaded. FileFlip converts STL files inside the browser tab you already have open, using WebAssembly builds of the same engines a desktop converter would install. Your file is read from your own disk into the page's memory, and no request carrying it is ever made.
You do not have to take that on trust. Open your browser's network panel, run a conversion, and you will see the engine come down and your file go nowhere. There is no upload, no server-side copy, no retention window, and no account tied to what you converted.
How FileFlip works lists every engine, its version and its download size, and shows how to check for yourself that nothing leaves your machine.
What STL to OBJ actually does to the file#
Converting STL to OBJ runs on Assimp, downloads 11.2 MB of WebAssembly the first time and nothing after that, rebuilds the file in the target's own model, and drops skeleton and animation.
| Engine | Assimp |
|---|---|
| Conversion path | One step: STL → OBJ |
| Downloaded to your browser | 11.2 MB, once, then cached by your browser |
| Quality | Rebuilt in the target's model |
| You get back | One file, or a ZIP when the source carries separate materials or buffers |
| Where it runs | In a background worker, so the page stays responsive |
What survives the conversion
| What is in the file | This conversion | Why |
|---|---|---|
| Materials | Sometimes | Survives for some files and not others. |
| Textures | Sometimes | Survives for some files and not others. |
| Skeleton and animation | Dropped | The target format has nowhere to put it. |
Worth knowing before you start:
- the result is a single file when the model has no external materials or buffers, and a ZIP when it does
- if the source carries a skeleton or animation, this target has no place to store it
What is an STL file?#
An STL file is a triangle mesh created by 3D Systems in 1987 for its stereolithography 3D printers, storing nothing but a flat list of triangle facets and their normals, with no colour, material or unit of measurement attached.
Use STL when the only destination is a 3D printer's slicer, which is all the format was designed to feed.
Convert STL to 3MF when colour, material or unit information needs to travel with the geometry, since STL has nowhere to put any of it.
What is an OBJ file?#
An OBJ file is a plain-text 3D geometry format that Wavefront Technologies designed for its Advanced Visualizer software, storing vertex positions, texture coordinates and normals as human-readable lines of ASCII text.
Use OBJ when a static mesh needs to move between two different applications with the least risk of anything being misread.
Convert away from OBJ when the model needs animation, a skeleton, or to travel as a single file without a companion MTL.
STL to OBJ questions people ask#
What is an STL file used for?
An STL file is the standard input for 3D printer slicing software, storing a model's surface as a list of triangles with nothing else attached. Slicers use it to work out where to lay down material layer by layer.
Why doesn't my STL file have color?
STL was designed in 1987 purely to describe a shape for stereolithography printing, so it never included fields for colour, material or texture, only triangle geometry. 3MF was created later specifically to add colour and material data that STL can't hold.
What's the difference between ASCII and binary STL?
ASCII STL spells each triangle out as readable text starting with 'solid' and ending with 'endsolid', while binary STL packs the same triangles into a compact format with an 80-byte header followed by a triangle count and raw floating-point data. Binary STL is far smaller and is what most software writes by default.
What units does an STL file use?
STL has no built-in unit of measurement; every coordinate is just a number, and the software producing or consuming the file has to agree separately on whether it means millimetres, inches or something else. Importing an STL into the wrong unit setting is a common cause of a model coming out the wrong size.