PMX to STL Converter
FileFlip converts PMX to STL entirely inside your browser, using Assimp compiled to WebAssembly. The file is never uploaded to a server: it is read off your disk, converted on your own machine, and saved back by the browser. That means no file-size limit, no queue and no account.
How do I convert a PMX file to STL?#
- Drop your PMX file onto the converter at the top of this page, or click it to pick one from your computer. You can add as many as you like.
- Leave the target set to STL and the conversion starts on its own. FileFlip downloads 11.2 MB of WebAssembly the first time and nothing after that, then runs Assimp on your own machine.
- Save the STL file. Your browser writes it straight to your downloads folder, because there was never a server holding it.
Does converting PMX to STL lose quality?#
Not in the sense of pixels or samples. Converting PMX to STL rebuilds the file in STL's own model rather than re-encoding it, so everything STL can represent comes through exactly and anything it cannot has to be dropped. Expect the geometry to be exact, and anything the target has no place for, such as a rig, to be left behind.
Is it safe to convert PMX files online?#
Yes, because nothing is uploaded. FileFlip converts PMX files inside the browser tab you already have open, using WebAssembly builds of the same engines a desktop converter would install. Your file is read from your own disk into the page's memory, and no request carrying it is ever made.
You do not have to take that on trust. Open your browser's network panel, run a conversion, and you will see the engine come down and your file go nowhere. There is no upload, no server-side copy, no retention window, and no account tied to what you converted.
How FileFlip works lists every engine, its version and its download size, and shows how to check for yourself that nothing leaves your machine.
What PMX to STL actually does to the file#
Converting PMX to STL runs on Assimp, downloads 11.2 MB of WebAssembly the first time and nothing after that, rebuilds the file in the target's own model, and drops materials, textures and skeleton and animation.
| Engine | Assimp |
|---|---|
| Conversion path | One step: PMX → STL |
| Downloaded to your browser | 11.2 MB, once, then cached by your browser |
| Quality | Rebuilt in the target's model |
| You get back | One file |
| Where it runs | In a background worker, so the page stays responsive |
What survives the conversion
| What is in the file | This conversion | Why |
|---|---|---|
| Materials | Dropped | The target format has nowhere to put it. |
| Textures | Dropped | The target format has nowhere to put it. |
| Skeleton and animation | Dropped | The target format has nowhere to put it. |
Worth knowing before you start:
- the target stores triangles and nothing else, so materials, colours, and texture coordinates have nowhere to go
- if the source carries a skeleton or animation, this target has no place to store it
What is a PMX file?#
A PMX file is a binary character model for MikuMikuDance, the successor to the older PMD format, built by Yu Higuchi's tools to hold a mesh alongside its bones, facial morphs and rigid-body physics as one package that MMD loads and animates directly.
Use PMX when a character needs to be posed, animated or physics-simulated inside MikuMikuDance or the wider MMD tool ecosystem.
Convert PMX to glTF or FBX when an MMD character needs to move into a game engine or renderer outside the MMD ecosystem.
What is an STL file?#
An STL file is a triangle mesh created by 3D Systems in 1987 for its stereolithography 3D printers, storing nothing but a flat list of triangle facets and their normals, with no colour, material or unit of measurement attached.
Use STL when the only destination is a 3D printer's slicer, which is all the format was designed to feed.
Convert STL to 3MF when colour, material or unit information needs to travel with the geometry, since STL has nowhere to put any of it.
PMX to STL questions people ask#
What is a PMX file?
A PMX file is a MikuMikuDance character model, storing a mesh together with its bones, facial morphs and rigid-body physics in one binary file. It's the successor to the older PMD format and the format almost all current MMD character content is distributed in.
What's the difference between PMD and PMX?
PMD is the older MikuMikuDance model format, and PMX succeeded it with a more flexible bone and morph system, support for more materials, and additional physics options. PMX Editor can open and convert PMD files, and current MMD content is essentially all PMX now.
Can I open a PMX file outside MikuMikuDance?
Yes, Blender opens PMX files through the community mmd_tools add-on, which reads the mesh, bones, morphs and physics much the way MikuMikuDance does. Outside of MMD-focused tools, native PMX support is rare.
What is an STL file used for?
An STL file is the standard input for 3D printer slicing software, storing a model's surface as a list of triangles with nothing else attached. Slicers use it to work out where to lay down material layer by layer.